Applications

High Speed Tuning Vector Receiver Load Pull Measurements Large Signal Analysis, Nonlinear VNA Measurements and Behavioral Model Extraction Linear and Nonlinear Compact Modeling Noise Figure / Noise Parameter Measurements Active Load Pull and Hybrid-Active Load Pull Measurements Active Wideband-Impedance Load Pull Measurements for 4G, 5G and WLAN Signals mmW and Sub-THz 50Ω Gain Compression and Active Load Pull Measurements Mobile Phone Testing Under Real-World Conditions Amplifier Stability and Ruggedness Testing On-Wafer Production Testing Stability Analysis of Microwave Circuits

Products

IVCAD Advanced Measurement and Modeling Software (MT930 series) ATS Automated Tuner Software (MT993 series) IQSTAR Circuit Measurement and Analysis Software (IQS series) MMW-STUDIO mmW and Sub-THz Characterization Software (MT920 series) AMTS Automated Mobile Test Software (MT910 series) Mixed-Signal Active Load Pull System (MT1000 and MT2000 series) Automated Tuners / Impedance Tuners / Load Pull Tuners Manual Tuners / Impedance Tuners Pulsed IV Systems (AM3200-series) Pulsed SMU Systems (AM3100-series) Noise Receiver Modules (MT7553 series) Transistor Test Fixtures (MT964 series) Low Loss Couplers (LLC series) Precision Low-Loss Multiplexers (DP/TP series) High-Power Low-Loss Pulsed Bias Tees (MBT series) High-Resolution Current Probes (AVCP series) Harmonic Phase References (HPR series)

Products

Insight Calibration & Measurement Software VNA Calibration Kits Verification Kits Coaxial Calibration Standards Waveguide Calibration Standards Metrology Torque Wrenches Connector Gage Kits Noise Calibration Systems and Accessories Stub Tuners

Services

VNA Cal Kit Verification and Calibration Torque Wrench Calibration Warranty & Service

Products

Adapters
Calibration-Grade (Metrology) Adapters
ColorConnect™ Precision Adapters
Test Essentials™ Lab Adapters
Quick Test Push-On Adapters
Cable Assemblies
StabilityVNA™ Test Port Cable Assemblies
StabilityPlus™ Cable Assemblies
StabilityPlus™ Low Profile Cable Assemblies
StabilityBench™ Cable Assemblies
StabilityTVAC™ Cable Assemblies
Attenuators TW-series Torque Wrenches Connector Gage Kits

Services

System Integration Services Measurement Services System-Level Verification Devices and Device Characterization Services Rental, Lease, Finance Services VNA Cal Kit Calibration Torque Wrench Calibration Warranty Service

Resources

Application Notes Library Videos
Products and Solutions Overview
Software Overview
Best Practices and Tips-and-Tricks
Seminars and Webinars
Files
Software Download Site
VNA Cal Kit Files

Waveguide Transmission Lines and Test Port Adapters

Straight Sections and Transitions

Description

Maury produces waveguide components in many EIA WR sizes. A comprehensive line of standard rectangular products is available in the sizes shown below. They are generally supplied with cover flanges. Units from S through P bands are normally aluminum construction with irridite finish; K band and above are copper alloy with a plated finish. All units are painted with highly durable paint, or other special order finishes.

Available Models

Swipeable Content
MODEL FREQUENCY RANGE (GHz) LENGTH
INCHES (CM)
S102C5 2.60 - 3.95 5.0 (12.7)
E102G5 3.30 - 4.90 5.0 (12.7)
G102C5 3.95 - 5.85 5.0 (12.7)
F102C5 4.90 - 7.50 5.0 (12.7)
C103C5 5.85 - 8.20 5.0 (12.7)
H103A5 7.05 - 10.0 5.0 (12.7)
X103A5 8.20 - 12.4 5.0 (12.7)
M103A5 10.0 - 15.0 5.0 (12.7)
P103A5 12.4 - 18.0 5.0 (12.7)
N102F4 15.0 - 22.0 4.0 (10.2)
K103A4 18.0 - 26.5 4.0 (10.2)
Q106D 22.0 - 33.0 4.0 (10.2)
U103A4 26.5 - 40.0 4.0 (10.2)
J106B1 33.0 - 50.0 2.2 (5.6)

Application Notes and Data Sheets

Full Catalog

Download or View Online Full Catalog

Maury Application Notes Library

Maury Software and System Application Notes. View Maury's Application Notes Library