About Maury Microwave

Company History

Maury and Associates was founded by Mario A. Maury Sr., in Montclair, California on October 15, 1957. With the help of sons, Mario A. Maury, Jr., and Marc A. Maury, the company earned a solid reputation in the microwave test and calibration industry, while developing a comprehensive line of precision instruments, coaxial and waveguide components, and support products. Now, after more than 50 years of meeting our customers' needs, we operate as Maury Microwave Corporation. Our company has become the world's leading manufacturer of laboratory devices and system components, with an emphasis on device characterization and automated tuning systems.
Corporate Profile | Executive and Management Teams | General Facts
AS9100:2009 Rev C and ISO9001:2008 Certification | Terms & Conditions and Quality Clauses

Corporate Profile

Maury Microwave Corporation is a leading manufacturer of RF and microwave laboratory devices, calibration standards and system components. We serve all areas of the microwave and RF industry with special emphasis on RF Device Characterization and Automated Tuner Systems. Wherever accuracy, stability and repeatability are critical Maury is recognized for the high performance, quality and reliability of our products.

Agilent Technologies acknowledged this in September, 2001, by inviting Maury Microwave to become a Channel partner for device characterization solutions. Maury also enjoys close business cooperation with Cascade Microtech of Beaverton, Oregon.

Located 40 miles east of Los Angeles, in Ontario, California, our 96,000 sq. ft. facility is just minutes from Ontario International Airport. Our factory is equipped with the latest CNC machines and can handle high volume or small quantity precision manufacturing jobs. We maintain a state-of-the-art microwave laboratory with the latest test equipment supporting our test and calibration operations.

Maury provides calibration services for every product we make, in a controlled environment with the latest measurement and verification equipment. Our engineering and technical expertise enables us to meet customer needs from design to manufacturing, with full continuity right down to our after-sales service.

Executive & Management Teams

Michael Howo
Chief Executive Officer and President

Gary Simpson
Chief Technology Officer

Steve Dudkiewicz
Vice President, Marketing & Business Development

Ted Lewis
Vice President, Sales

Eric Kueckels
Director of Global Sales, Device Characterization

Sathya Padmanabhan
Director, Product Development

Jim Adamson
Director, Customer Solutions

Julie Pham
Controller

Mauro Marchetti
CEO, Anteverta-mw (a Maury Microwave company)

Greg Maury
Corporate Secretary

Maury General Facts

Company Name:
MAURY MICROWAVE CORPORATION

Address:
2900 Inland Empire Blvd., Ontario, California 91764 USA

Telephone: (909) 987-4715
Fax: (909) 987-1112
Email: maury@maurymw.com

Codes
Federal Supply Code Identification No. 13047
Standard Industrial Classification (SIC) 3825

Business Classification
Small Business

Brief History
Founded 1957 as Maury & Associates in Pomona, California by M. A. Maury (deceased);
incorporated as Maury Microwave Corporation 1963;
moved to Rancho Cucamonga, California 1969;
acquired Eaton EID Noise Product Line 1991;
moved to Ontario, California 1991;
named Agilent Channel Partner 2001:
licensed ATN solid state technology from Agilent 2002;
licensed LSNA technology from Agilent 2003.

Products
Microwave Test Instruments;
Coaxial & Waveguide Components, DC to 110 GHz;
Device Characterization Systems

Quality Management System
Conforms with ISO 9001:2008 with AS9100:2009 Rev C as assessed by EAGLE Registrations Inc. of Dayton Ohio. (Certificate of Registration No. 3867)
Scope of Registration: Design, Manufacturing and Servicing of Microwave Based Measuring and Testing Equipment for the Aerospace, Defense and Wireless Telecom Industries.

Domestic Terms
Net 30 days; F.O.B. Ontario, California.
Refer to Form 228.
Minimum Order: $300 (US) per line item

Export Terms
Refer to Form 250.
Minimum Order: $300 (US) per line item

Maury Microwave Corporation

ISO 9001:2008 - AS9100:2009 Rev C Documentation

Maury is registered as an ISO 9001:2008/AS9100:2009 Rev C compliant company for Design, Manufacturing and Servicing of Microwave Based Measuring and Testing Equipment for the Aerospace, Defense and Wireless Telecom Industries.

Download a PDF copy of Maury's Certificate of Registration (AS9100_cert.pdf - 120 KB)

Maury Microwave Corporation

Terms & Conditions and Quality Clauses

Maury is registered as an ISO 9001:2008/AS9100:2009 Rev C compliant company for Design, Manufacturing and Servicing of Microwave Based Measuring and Testing Equipment for the Aerospace, Defense and Wireless Telecom Industries.

Download a PDF copy of Maury's Terms & Conditions and Quality Clauses (TC_Quality.pdf - 268 KB)

Corporate Policies

Maury Microwave Corporation is environmentally responsible and safety conscious in all aspects of our operations and in regard to all of our products and services. The following corporate policies are provided for review by our customers and other interested parties:
Maury Microwave Corporation Product Safety and Regulations Policy
Maury Microwave Corporation Declaration of Status to RoHS and REACH SVHC Directives
Maury Microwave Corporation Environmental Policy | Maury Microwave Conflict Minerals Compliance

Product Safety and Regulations Policy

Maury's Product Safety Policy is to provide products that meet legal requirements and are safe for their intended markets and use.

Maury's managers and employees are expected to support this policy in accordance with their roles and responsibilities in the organization.

The following courses of action outline our conformance with this policy:

Determine safety, regulatory and related customer requirements applicable to our products in their intended markets.
Integrate product safety and regulatory compliance principles and methodologies into our business and decision making practices.
Design and verify product compliance with all applicable safety and regulatory requirements.
Provide clear, accurate and timely conformity information to customers, employees, and government agencies.
Undertake appropriate and timely investigations and corrective actions in response to any product safety incident.
Continually improve the effectiveness of our product safety and regulatory compliance processes, practices and tools to enhance results for our customers and employees.

This policy is approved by Maury's Executive Committee and applies to Maury operations worldwide.

Printed copies of this document are uncontrolled.

Declaration of Status to RoHS Directive and REACH SVHC

It is the policy of Maury Microwave Corporation (Maury) to provide the highest quality precision microwave measurement and test solutions to our customers.

We strive to conduct all our business with honesty and integrity. We endeavor to provide products and services that meet or exceed, if possible, all legal regulations and/or requirements in their intended markets.

As of July 2006 the European Union market will have begun enforcement of the Restriction of the use of certain Hazardous Substances (RoHS) Directive. RoHS is supplemental to the Waste of Electrical and Electric Equipment (WEEE) Directive; specifically categories 1, 2, 3, 4, 5, 6, 7 and 10. Maury products are intended for commercial, defense and industrial use only, and are classified within the WEEE/RoHS Category 9 list as monitoring and control equipment.

Additionally, Maury products do not contain any REACH Substances of Very High Concern (SVHC) as published by the European Chemical Agency (ECHA).

MAURY PRODUCT LINES

The Maury Device Characterization and Noise Calibration System product lines, used as Test and Measurement fixtures, are classified as monitoring and control equipment (category 9). However, Maury is proud to state that most of these products are RoHS compliant. We will continue to ensure that all of these product lines will be in full RoHS compliance. Additionally, these products comply with REACH SVHC requirements.

Maury calibration standards, components and test accessory product lines have been reviewed for RoHS compliance for all restricted substances. Most are manufactured from metal alloys, for which some are known to contain lead in small concentrations below the maximum levels specified by RoHS. To the best of our knowledge all above products have been found to be RoHS compliant. Additionally, these products comply with REACH SVHC requirements.

Maury considers it our corporate social responsibility to limit the use of hazardous substances and shall diligently continue to proceed with the development of products that will continue to meet the requirements of the RoHS Directive and REACH SVHC directives.

Maury is compliant with all local, state, and Federal agencies. Evidence of compliance is maintained on site.

Greg Maury
President & CEO

Environmental Policy

It Maury's Environmental Policy is to act in an environmentally responsible manner in regard to our operations and products.

Maury's managers and employees are expected to support this policy in accordance with their roles and responsibilities in the organization.

The following courses of action stipulate our conformance with this policy:

Operate an environmental management system that is aligned with our business practices and the practice of continual improvement.
Conduct our operations in a manner that is committed to recycling, conservation of resources, active remediation of environmental contamination, and prevention of pollution.
Ensure our products and operations comply with relevant environmental legislation and regulations.
Responsibly manage the use of hazardous materials in our operations and products and promote recycling of our products.
Inform suppliers, partners, and contractors of our environmental expectations and encourage them to adopt sound environmental management practices.
Promote environmental responsibility among our employees.
Make accurate environmental information about our products and operations available to customers, shareholders, employees and government agencies.
Continually improve the effectiveness of our product safety and regulatory compliance processes, practices and tools to enhance results for our customers and employees.

This policy is approved by Maury's Executive Committee and applies to Maury operations worldwide.

Printed copies of this document are uncontrolled.

Conflict Minerals Compliance

Products supplied by Maury Microwave Corporation do not contain any of the minerals defined as Conflict Minerals in accordance with the SEC Section 1502 of the Dodd-Frank Wall Street Reform and Consumer Protection Act.

Download a PDF copy of Maury's Conflict Minerals Compliance (ConflictMineralsCompliance.pdf - 320 KB)