Home < RFDCS Products < PC Based Application Software

PC BASED APPLICATION SOFTWARE
For Automated RF Device Characterization Solutions

Maury Microwave offers a variety of device characterization solutions that meet the needs of RF and microwave design, model verification, test and measurement users. From test fixtures to complete on-wafer probe station setups, from Noise Parameter and S-Parameter measurements to Wi-Fi, bluetooth and WLAN modeling, Maury has a solution that can be tailored to your exact needs.

The solutions we offer are built around a combination of Windows® compatible software and electro-mechanical or solid state hardware. The heart of Maury's PC based application software is the SNPW program. The SNPW program automates measurement of RF/microwave devices, and can be ordered in packaged configurations that cover a wide range of applications.

Software Packages
Power Characterization Application (MT993A)
Includes a built-in general purpose S-Parameter measurement program and Dynamic Pre-Matching function.
Noise Characterization Application (MT993B)
Includes a built-in general purpose S-Parameter measurement program and Dynamic Pre-Matching function.
Power and Noise Characterization Application (MT993C). See MT993A.
This package combines MT993A and MT993B applications.
IMD/ACP Option (MT993D)
The MT993D option adds an intermodulation distortion and an adjacent channel power measurement application to the MT993A/C.
Oscillator Characterization Option (MT993D02)
The MT993D02 option adds an oscillator characterization application to the MT993A/C.
System Control Option (MT993F)
The MT993F option provides automated switching between noise, power, IMD, ACP, DC I-V curves, and S-parameter measurements from a single setup.
DC I-V Curve Option (MT993G)
The MT993G option provides for automatic mesurement and display of device DC current-voltage curves for FET or bipolar devices.
Harmonic Source/Load Pull Option (MT993H)
The MT993H option allows load pull measurements to be done independantly at the fundamental, 2nd harmonic and 3rd harmonic frequencies.
Enhanced Graphics Option (MT993N07)
The MT993N07 option allows users to customize their graphical displays to show swept data on a rectangular graph and contour data in 2-D or 3-D countours using Surfer, a third party graphics software pagkage.
Post Analysis Software (MT993P)
The MT993P option is a stand-alone version of MT993C, which can display and analyze measured data, but cannot be used to make new measurements. It allows users to analyze data from existing measurements on a stand-alone PC, and frees their test setup to continue making additional new measurements.
Contour Caculation DLL (MT993V01)
The MT993V01 option is a software package that caculates a data value for an arbitrary reflection coefficient from a contour data set. It also adds interpolated tuning capability to the MT993V02 Tuner Driver DLL.
Tuner Driver DLL (MT993V02)
The MT993V02 option is a software package that provides basic tuner control to the MT993A/BC through which users can initialize tuners and control all tuner movements, read tuner files, move tuners to desired impedances from tuner files, and (if the MT993V01 Contour Calculation DLL is available) move tuners to any desired interpolated impedances from the tuner files.
Fixture Characterization and S-Parameter Measurement Software (MT956D)
The MT956D is a software de-embedding tool which works as a network analyzer control program that automatically measures general purpose network parameters and, depending on the features of the fixture, measure or calculate the input and output halves of a test fixture or probe station using a full 2-port or two 1-port calibrations.

Download the Current Software Upgrades

Maury Microwave Software FTP Site (ATS User ID and Password are required for entry to this area.)

Please contact our Sales Department or your local Maury Representative for more information about these software applications.

4T-050F ( 1.5 MB) Technical Data - Automated Tuner Systems
5A-023 ( __ KB) Application Note - ATS for Power/Noise Characterization Using PC-AT Based Software
5C-038 ( 246 KB) Application Note - Fixture Characterization and S-Parameter Measurement Using Maury MT956D Software
5C-041 ( 31 KB) Application Note - Theory of Load and Source Pull Measurement
5C-042 ( 85 KB) Application Note - Theory of Noise Measurement

*PDF (Portable Document Format) files can be viewed with Adobe® Acrobat Reader™.
Download the PDF reader from Adobe.com
Request printed versions of Maury Product Data Sheets