Maury Microwave Corporation

Home < RF Adapters and Components < Coaxial Adapters

In-Series and Between-Series Coaxial Adapters

Type N Between-Series, 50 ohm

Type N Phase Matched In-Series, 50 ohm

Type N Precision In-Series, 50 ohm

Type N Coaxial, 75 ohm

Type N Panel Mount

3.5mm In-Series

3.5mm Between-Series

3.5mm Panel Mount

NMD, Panel Mount

2.92mm (K) Between-Series

2.92mm (K) In-Series

2.4mm (Q) Between-Series

2.4mm (Q) In-Series

MPC8 (OSSM) Between-Series

7mm Coaxial

7mm Panel Mount

14mm (MPC14) Coaxial

7-16 (2706 and 2707 Series)

LCP/OSP(8787x Series)

Rigid Line EIA

SC In-Series and Between-Series (Type N)

TNC In-Series

AFTNC In-Series

75 ohm BNC

General

Maury Microwave produces a comprehensive line of both in-series and between-series coaxial adapters. Adapters are available for all precision laboratory measurement connectors - 2.4mm, 2.92mm (K), 3.5mm, 7mm, 14mm, etc.; all common systems connectors - type N, TNC, AFTNC etc.; and several special purpose connector series such as 7-16 and EIA rigid line connectors.

Special Adapters

Maury also manufactures adapters in other less common connector series. Due to the many varieties and types, they are not listed here.

If you have a specific need, please contact our Sales Department for more information or for technical assistance.

Test Port Adapters

Maury test port adapters are specifically designed to mate with the special ruggedized connectors used on commercial VNA test sets, such as those used with the Agilent 8510 and Anritsu 360. The test port adapters can convert those connectors to a more common coaxial connector series. These adapters can offer significant cost savings in terms of less VNA down time and repair costs. Because of the special purpose and design of these adapters, we have grouped them together for easier reference. Click here for more information about Maury Test Port Adapters.

Phase Matched Adapters

Phase matched adapters are used in two-port VNA calibrations when the devices have same sex input and output connectors that must be tested. Thru connection for calibration is made using adapters with female and male connectors. One adapter is then replaced to permit mating to the test device. With phase matched adapters, this can be done without significantly degrading the VNA error correction capability. Phase matched in-series and between-series adapters are noted as such throughout our web site.

Connector Interfaces

All industry standard connectors used on Maury adapters are mating compatible with connectors conforming to the applicable MIL-C or MIL-T specifications. However, because of the need for precision in many applications, most Maury connectors are manufactured to even more exacting requirements. Applicable interface specifications are available on request. (For more information about Maury precision coaxial connectors CLICK HERE.)

Copyright 2006 by Maury Microwave Corporation. All rights reserved.

Home < RF Adapters and Components < Coaxial Adapters
In-Series and Between-Series Coaxial Adapters
Type N Between-Series, 50 ohm Type N Phase Matched In-Series, 50 ohm Type N Precision In-Series, 50 ohm Type N Coaxial, 75 ohm Type N Panel Mount 3.5mm In-Series 3.5mm Between-Series 3.5mm Panel Mount NMD, Panel Mount 2.92mm (K) Between-Series 2.92mm (K) In-Series 2.4mm (Q) Between-Series 2.4mm (Q) In-Series MPC8 (OSSM) Between-Series 7mm Coaxial 7mm Panel Mount 14mm (MPC14) Coaxial 7-16 (2706 and 2707 Series) LCP/OSP(8787x Series) Rigid Line EIA SC In-Series and Between-Series (Type N) TNC In-Series AFTNC In-Series 75 ohm BNC	General Maury Microwave produces a comprehensive line of both in-series and between-series coaxial adapters. Adapters are available for all precision laboratory measurement connectors - 2.4mm, 2.92mm (K), 3.5mm, 7mm, 14mm, etc.; all common systems connectors - type N, TNC, AFTNC etc.; and several special purpose connector series such as 7-16 and EIA rigid line connectors. Special Adapters Maury also manufactures adapters in other less common connector series. Due to the many varieties and types, they are not listed here. If you have a specific need, please contact our Sales Department for more information or for technical assistance. Test Port Adapters Maury test port adapters are specifically designed to mate with the special ruggedized connectors used on commercial VNA test sets, such as those used with the Agilent 8510 and Anritsu 360. The test port adapters can convert those connectors to a more common coaxial connector series. These adapters can offer significant cost savings in terms of less VNA down time and repair costs. Because of the special purpose and design of these adapters, we have grouped them together for easier reference. Click here for more information about Maury Test Port Adapters. Phase Matched Adapters Phase matched adapters are used in two-port VNA calibrations when the devices have same sex input and output connectors that must be tested. Thru connection for calibration is made using adapters with female and male connectors. One adapter is then replaced to permit mating to the test device. With phase matched adapters, this can be done without significantly degrading the VNA error correction capability. Phase matched in-series and between-series adapters are noted as such throughout our web site. Connector Interfaces All industry standard connectors used on Maury adapters are mating compatible with connectors conforming to the applicable MIL-C or MIL-T specifications. However, because of the need for precision in many applications, most Maury connectors are manufactured to even more exacting requirements. Applicable interface specifications are available on request. (For more information about Maury precision coaxial connectors CLICK HERE.)
Copyright 2006 by Maury Microwave Corporation. All rights reserved.