Home
< Products < Precision Calibration Standards < Waveguide
VNA Calibration Kits
< 7006A/B
series
Waveguide
VNA Calibration Kits
7006A/B
Series Economy Kits Description Kit
Composition All kit component flanges
have precision indexing holes for excellent measurement
repeatability (indexing pins are provided). Test Port and Cable
Connectors J7006A Quantity
Description
Adapter, end
launch, NMD 3.5mm (f) 1
Adapter, right
angle launch, 3.5mm (m)
1
Sliding
termination
1/4 Wavelength
waveguide section (shim)
Fixed (reference
plane) short2
Flange hardware
including indexing pins (set)
Data medium
containing the calibration constants
3
Instrument
case
Operating
instructions
Agilent
8510A/B/C
Agilent 8719/20/22
Anritsu 360
Anritsu 37000
The Maury 7006A/B
series VNA calibration kits provide an economical and cost
effective means of accurately calibrating a wide range of
vector network analyzers for measurements in rectangular
waveguide at frequencies from 2.6 to 40.0 GHz (WR284 through
WR28). See the chart
of available models
for details. These kits are applicable to Agilent 8510A/B/C,
Agilent 8719/20/22, and Anritsu 360 and 37000 series
analyzers.
As shown in the
adjacent table, the 7006 series calibration kits provide all
the devices needed for accurately calibrating the listed
VNA. Kits in standard rectangular waveguide are supplied
with an end launch adapter for convenience in connecting to
the test set2.
The sliding terminations in these kits are the precision 313
series. These terminations (used with the 1/4 wavelength
shim approach) provide a cost effective means of achieving
an accurate calibration.
These kits are
configured for use with VNA test sets and test cables
utilizing 3.5mm or 2.4mm connectors.
1
WR34 and WR28 are supplied with
2.4mm female right angle launch adapters.
2
Two (2) fixed shorts are
provided with Anritsu kits.
3
Tape cartridge for the Agilent
8510A/B; 3-1/2" disk for the Agilent 8510C, Agilent
8719/20/22, and Anritsu 360 and 37000.