Home
< Products
< Precision Calibration Standards<
Waveguide
VNA Calibration Kits
< Millimeter, 7005M/N/X Series
Millimeter
Waveguide VNA Calibration Kits
7005M/N/X
Series Economy Kits Description Flange
Information Calibration
Method Test Port and Cable
Connectors For Kit Composition and
chart of Available Models click
here.
J7005N
• Agilent
8510A/B/C
• Anritsu 360
• Anritsu 37000
The 7005M/N/X series
are economical, cost effective kits designed to provide
accurate calibration of network analyzers from 26.5 GHz
(Agilent 8510 series) or 33 GHz (Anritsu 360 and 37000
series) through 110 GHz in rectangular waveguide sizes WR28
through WR10.
All kit component
flanges are provided with precision indexing holes for
excellent measurement repeatability (indexing pins are
provided with the kit). Millimeter waveguide flanges for use
on WR22 and smaller sizes are of a unique Maury pioneered
design. This design features a raised outer rim to prevent
the flanges from cocking during connection, and removable
four-pin alignment pattern pins to permit servicing the
flanges. These flanges will mate with corresponding UG( )/U
flanges.
The 7005M series VNA
calibration kits for Agilent 8510 VNAs are configured for
the short-short-load-load-thru (SSLLT) calibration method
using a fixed short, a fixed precision termination, and a
1/4 wavelength shim. The 7005N/X series calibration kits for
the Anritsu 360 and 37000 VNAs are configured for the
short-short-load-thru (SSLT) calibration method using
sliding terminations.
These kits are
configured for use with VNAs utilizing external millimeter
waveguide test heads or modules.
