Home < Products < Precision Calibration Standards & Accessories < Fixed and Offset Short Circuits - Precision 7mm /14mm Fixed and Precision 7-16 Fixed

Fixed and Offset Short Circuits

Precision 7mm and 14mm
Fixed Short Circuits

Description

Three models are available in each of these precision, sexless connector series. The "A" models are flat plane shorts. The "B" models have a standard contact (collet) in the short plane (in the 7mm short, this is a new, high performance 6-slot collet). The "D" models are similar to the flat plane shorts except for a precision hole in the center of the shorting surface to support beadless air lines. These last are the shorts most often found in precision VNA calibration kits.
2615A3,
2615B3

2415A1
2415B1

Specifications

Model

Connector

Frequency Range (GHz)

2615A3

1

2615B3

2

2615D3

3

7mm
4
DC
-
18.0

2415A1

1

2415B1

2

2415D1

3

14mm
4
DC
-
8.5

Precision 7-16 Fixed Short Circuits

Description

he 2714A and 2714B are precision 7-16 fixed shorts designed to operate from DC to 7.5 GHz. These shorts, although classified as "fixed", establish a measurement plane of 2.00cm offset from the connector reference plane for compatibility with the companion 2716 series open circuits.
2714A,
2714B

Specifications
Model 2714A

Female , 7-16 fixed short

Model 2714B

Male, 7-16 fixed short

Reflection Coefficient

0.99 (minimum)

Frequency Range

DC - 7.5 GHz

Offset Length

2.00cm

Offset Length Accuracy

+0.001 inches (0.003cm)

1

Flat plane short.

3

Air line support hole in short plane.

2

Center contact in short plane.

4

Mating compatible with GR900.

Copyright 2006 by Maury Microwave Corporation. All rights reserved.