Home < Precision Calibration Standards < Coaxial Calibration Kits < 8650P Series
TNC VNA Calibration Kits
8650P Series Data Sheet 2Z-023P Fixed Termination Kit • Single Fixed Load Calibration • Precision TNC Connector • Phase Matched Adapters Description Maury's 8650P series calibration kits are designed for calibrating Agilent 8753 Vector Network Analyzers (VNAs) equipped with 7mm test ports, for measuring devices with TNC connectors from DC to 6 GHz. Each kit is provided with all required calibration hardware as listed on this page, and is supplied in an attractive foam-lined wooden instrument case. Operating instructions are provided with the calibration kit constants so they can be keyed-in through the front panel. Connector Description The TNC connectors (MPC/TNC) on the components in this kit are precision stainless steel connectors that mate with MIL-C-39012 and MIL-T-81490 connectors. They are low VSWR connectors rated from DC to 18 GHz. Option Option 16 Provided with the 8650S16, 3-1/2" data disk for Agilent 8753C; this is a convenient and reliable method of entering the calibration kit constants NOTE: Agilent 9122C, single or dual, external disk drive is also required Available Accesories (not provided) In-series Adapters: TNC female to female -- 232A2 TNC male to male -- 232B2 TNC female to male -- 232C2 Connector Gage: Connector gage -- A012A Torque Wrench: 0.562" hex, 12 in/lb -- 2698G1	8650P Equipment Provided in Kits 1 ea Precision fixed termination, TNC female 1 ea Precision fixed termination, TNC male 1 ea Fixed short, female 1 ea Fixed short, male 2 ea Adapter, 7mm to TNC female* 2 ea Adapter, 7mm to TNC male* 1 ea Open circuit, TNC female 1 ea Open circuit, TNC male 1 ea Instrument case 1 ea Operating instructions *Phase Matched set.
Copyright 2006 by Maury Microwave Corporation. All rights reserved.