Home < Precision Calibration Standards < Coaxial Calibration Kits < 8650 Series
TNC VNA CALIBRATION KITS
8650 Series Data Sheet 2Z-023E Data Sheet 2Z-023H Standard Kits • Broad VNA Coverage • Sliding Terminations Description Maury's precision TNC calibration kits are designed for use with a broad range of vector network analyzers (VNAs). With these kits you can make error corrected measurements of devices supplied with TNC connectors from 45 MHz to 18 GHz. Each kit is supplied with a full complement of calibration standards (shorts, opens, sliding and fixed loads) and can be configured for any combination of VNA or test set and cable connectors. You can incorporate the adapter set and software medium most appropriate to your needs by selecting option numbers from the chart below. All required calibration standards, adapters (as applicable) and accessories, along with the software medium (cartridge or 3-1/2" disk) containing the calibration constants and operating instructions, are supplied in an attractive foam-lined wooden instrument case. Connector Description All of the TNC connectors (MPC/TNC) supplied on the components in this kit are precision stainless steel connectors that mate with MIL-C-39012 and MIL-T-81490 connectors. They are low VSWR connectors rated from DC to 18 GHz. Model Chart Select the model number appropriate for the VNA and test set/cable connectors. Model VNA Test Set and Cable Connectors Software Medium 8650E(2) 2 7mm 3-1/2" disk 8650H Agilent8510A/B 3.5mm Cartridge 8650J Agilent 8510C 3.5mm 3-1/2" disk 8650M Agilent 8720 3.5mm 3-1/2" disk 8650W Anritsu 360 2.92mm (K)* 3-1/2" disk 8650X Anritsu 37000 2.92mm (K)* 3-1/2" disk * 3.5mm connectors are mating compatible with 2.92mm (K). The resulting junction is calibrated out and is not critical. Available Accesories (not provided) In-series Adapters: TNC female to female -- 232A2 TNC male to male -- 232B2 TNC female to male -- 232C2 Connector Gage: Push-on type - A012A Torque Wrench: 0.562" hex, 12 in/lbs - 2698G1	8650E Equipment Provided in Kits 1 ea Precision fixed termination, TNC female 1 ea Precision fixed termination, TNC male 1 ea Fixed short, TNC female 1 ea Fixed short, TNC male 1 ea Open circuit, TNC female 1 ea Open circuit, TNC male 1 ea Sliding termination, TNC female 1 ea Sliding termination, TNC male 1 ea Test port adapter, NMD3.5 female to TNC female1 1 ea Test port adapter, NMD3.5 female to TNC male 1 1 ea Adapter, TNC female to 3.5mm female**1 1 ea Adapter, TNC male to 3.5mm female**1 1 ea Adapter, TNC female to 3.5mm male**1 1 ea Adapter, TNC male to 3.5mm male**1 1 ea Configuration medium (with circuit constants) 1 ea Instrument case 1 ea Operating instructions ** Phased matched sets.
1 For kit 8650E, these adapters are replaced by 2 ea. TNC female to 7mm and 2 ea. TNC male to 7mm adapters. 2 Fill in the appropriate option number: 14 -Agilent 8510C 15 -Agilent 8720 16 -Agilent 8753 28 - Anritsu 360 29 - Anritsu 37000 Copyright 2006 by Maury Microwave Corporation. All rights reserved.