Home < Products < Precision Calibration Standards & Accessories < Connector Gage Kits
Connector Gage Kits
Features Direct Reading Self-Checking Accurate Easy to use Digital and Dial Indicator Styles Description Maury's connector gage kits provide an easy to use, direct reading, self-checking, and accurate way to measure the critical linear interface dimensions of most coaxial connectors. These kits consist of gages with specially adapted dial indicators, plus the correct bushings and pins needed to mate with specified connectors. A master setting gage is used to adjust the dial indicator to zero, before a push-on or thread-on gage is mated with a connector to measure the distance from a given interface (female or male contact location) to the outer conductor mating plane. Although Maury gages are normally sold as kits, individual components, replacement parts, and calibration services are also available. The table below lists the available kit models. Additional information on specific gage kits or individual components can be supplied on request.	[Click This Image For A Larger View] The A048A Digital Connector Gage Kit includes standards for gaging1.85mm and 2.4mm connectors. If this list doesn't include the right kit for your application, please contact our Sales Department or your local Maury representative for assistance. For more information about Maury precision connectors CLICK HERE.
Available Models (Digital Indicator Style) Connector Type Dial Resolution (inches) Model Description Data Sheet 1.85mm or 2.4mm 0.001 (mm) 0.00004 (in.) A048A Two metrology grade "thread-on" digital gages measure female and male contact pin locations of precision 2.4mm & 1.85mm connectors. 2Y-048 2.92mm (K) or 3.5mm 0.001 (mm) 0.00004 (in.) A050A Two metrology grade "thread-on" digital gages measure female and male contact pin locations of precision 3.5mm & 2.92mm (K) connectors. 2Y-049 Available Models (Dial Indicator Style) Connector Type Dial Resolution (inches) Model Description Data Sheet 2.4mm 0.0001 A035E Two metrology grade "thread-on" gages measure female and male contact pin locations of precision connectors. 2Y-022A 2.92mm (K) or 3.5mm 0.00025 A034B Two push-on gages measure female and male contact pin interface locations. 2Y-020 2.92mm (K) or 3.5mm 0.00010 A034E Two metrology grade "thread-on" female and male gages measure contact pin interface locations. 2Y-020A 7mm 0.0001 A028 Push-on gage measures planar contact location. 2Y-005 7mm 0.0001 A028D Metrology grade "thread-on" gage measures planar contact location. 2Y-005A N 0.001 A007A Push-on gage measures female and male contact pin location. 2Y-002 N 0.00025 A020A Push-on gage measures female and male contact pin location. 2Y-003 N 0.0001 A020D Two metrology grade "thread-on" female and male gages measure contact pin locations. 2Y-003A N (75 ohm) 0.0001 A020G Push-on gage measures female and male contact pin location of (75 ohm) type N connectors. 2Y-003G N, BNC, TNC, C or SC 0.00025 A025A Push-on gage measures female and male contact pin location. 2Y-016 BNC or TNC 0.0005 A012A Two push-on gages measure female and male contact pin and dielectric interface locations. 2Y-009 AFTNC, TNC or TNCA 0.00010 A012E Six push-on "universal" gages measure all contact pin and dielectric interface locations of all MIL-STD, IEC and commercial TNC connectors. 2Y-028 SMA 0.0005 A027 Two push-on gages measure female and male contact pin location. 2Y-004 SMA 0.0005 A027A Four push-on gages measure female and male contact pin and dielectric interface locations. 2Y-004 SMA 0.0005 A027G Two push-on gages measure female contact pin and dielectric interface locations. 2Y-004 SMA 0.0005 A027M Three push-on gages measure standard male contact pin and dielectric interface locations and the stepless 0.085-inch male pin dimension. 2Y-004 OSP™ 1 0.00025 A039C Push-on measures contact pin location of female and male. 2Y-026 14mm (GR900) 0.0001 A024 Push-on measures planar contact location of 14mm and 7mm connectors. 2Y-006 7-16 0.00025 A041A Push-on measures contact pin location of female and male. 2Y-027 SMP/GPO™ 2 0.00002 A042A Three push-on measures contact pin and dielectric interface locations of SMP connectors. 2Y-031 Multiport 0.00002 A045A Six push-on gages measures contact pin and dielectric locations of multiport connectors. 2Y-029 ZMA/BZ 0.00002 A046A Six push-on gages measures contact pin and dielectric locations of multiport connectors. 2Y-030 1 OSP™ (the Omni-Spectra designation) is a trademark of M/A-Com. 2 GPO™ is a trademark of the Gilbert Engineering Co., Inc.  Copyright 2007 by Maury Microwave Corporation. All rights reserved.