Home < I.85mm VNA Calibration Kits - Shortcut Page < 1.85mm VNA Calbibration Kits - 7850B Fixed Termination Kits

1.85mm VNA Calibration Kits
7850B Fixed Termination Kits

Features
 1.85mm Connectors
 DC to 70 GHz
 High Performance
 Broad VNA Coverage
 Offset Short Calibration

Description

These precision 1.85mm connector calibration kits are designed for use with a broad range of vector network analyzers (VNA). With these kits, you can make error-corrected measurements of devices equipped with 1.85mm connectors from DC to 70 GHz.

Each kit includes a full complement of calibration standards (multiple offset shorts, opens, and fixed loads) and can be configured for use with any combination of VNA or test set/cable connectors. User-specified VNA software and a set of adapters are included. All kit components come housed in an attractive, foam-lined, wood instrument case.

Connector Description

The precision 1.85mm connectors on the components in this kit are miniature, instrument grade, air-interface connectors that operate mode free up to 70 GHz, and comply with IEEE standard 287 general precision connector, instrument grade GPC1.85. For interface specifications please refer to Maury data sheet 5E-059.

Recommended Accessories

A048A Digital Connector Gage Kit (thread-on type)
7850B 1.85mm VNA Calibration Kit
(Click This Image For A Larger View)


Table 1. Components Included in 7850B Kits.

Quantity
Description
 Model
1 ea.
1 ea.
1 ea.
1 ea.
1 ea.
1 ea.
1 ea.
1 ea.
1 ea.
1 ea.
1 ea.
1 ea.
1 ea.
 1.85mm female fixed short circuit (0.5 cm)
1.85mm male fixed short circuit (0.5 cm)
1.85mm female open circuit termination
1.85mm male open circuit termination
1.85mm female low band fixed termination
1.85mm male low band fixed termination
1.85mm female high band fixed termination
1.85mm male high band fixed termination
Torque wrench (8 in/lbs)
5/16-inch double end wrench
VNA software disk
Operating Instructions (manual)
Instrument case
7846A
7847A
7848A
7848B
7831A1
7831B1
7832A
7832B
8799A1
—
—
—
—
Note: Each kit also includes a set of adapters that is user specified
per the Option Finder below. (Click here for details.)
Ordering Options
To specify the test port adapter and VNA software options you need, simply add two digits to the end of the kit model number (as shown). The first digit indicates your desired test port adapter set, and the second digit indicates the VNA software option number that corresponds to the test set you will be calibrating.

The example in this diagram shows the combination of digits needed to order a 7850B kit with the adapters and software needed for use in calibrating an Agilent PNA that has 1.85mm or 2.4mm test ports.
Option Finder
VNA
TEST PORT
TYPE
TEST PORT
ADAPTER
OPTIONS
VNA SOFTWARE OPTIONS
KITS WITHOUT
SOFTWARE
(OPTION 0)
ROHDE & SCHWARZ
ZV SERIES
(OPTION 1)
AGILENT
8510C
(OPTION 4)
AGILENT
8719/20/22
(OPTION 5)
AGILENT
PNA SERIES
(OPTION 7)
ANRITSU
37000
(OPTION 9)
1.85mm or 2.4mm 1
0
----
01
04
05
07
09
1
10
11
14
15
17
19
2
20
21
24
25
27
29
2.92mm or 3.5mm 1
3
30
31
34
35
37
39
1 1.85mm and 2.4mm connectors are fully mateable, as are 2.92mm and 3.5mm connectors. Resulting junctions are calibrated out and are not critcal.


Product Data Sheets and Application Notes (click the links below to download PDF* copies):

2Z-055 (184 KB) Technical Data - Model 7850B/F/M Series - 1.85mm VNA Calibration Kits (Fixed Termination Kits)
2Z-056 (744 KB) Technical Data - 1.85mm Cal Kits From Maury Microwave [Model series 7850A, 7850B, 7850F, 7850M, and 7860A]
5E-089 Engineering Data - Precision 1.85mm (GPC1.85) Coaxial connectors - Interface Dimensions

*PDF (Portable Document Format) files can be viewed with Adobe® Acrobat Reader™.
Download the PDF reader from Adobe.com
Request printed versions of Maury Product Data Sheets
Copyright 2006 by Maury Microwave Corporation. All rights reserved.