Home < Events & Media < Maury Press Releases < Press Release: Maury Releases New Metrology Grade 1.85mm/2.4mm Digital Connector Gage Kit (Model A048A)

Maury Releases New Metrology Grade
1.85/2.4mm Digital Connector Gage Kit (Model A048A)

Maury's Model A048A is a 1.85mm/2.4mm Metrology Grade, Thread-On, Digital Connector Gage Kit.

• Large, bold, Easy-To-Read Digital Display
• No Needle Position To Misread
• No Scales To Misinterpret
• ± 0.000050 Inch Gage Repeatability
• Thread-On Design For Hands-Free Use
• Reduces Inspection Time
• Increases Throughput

ONTARIO, California, June 4, 2003

Maury Microwave introduces the model A048A connector gage kit which is designed to measure 1.85/2.4mm connectors with either female or male interfaces. Repeatability of ±50 millionths of an inch (±0.00005 inch) is achieved by using digital indicators with 0.0001 inch graduations and tightly controlled tolerances on all machined parts. The Maury models A048A1 (female) and A048A2 (male) connector gage assemblies use a "thread-on" design that simulates actual mating conditions allowing high accuracy measurements. Critical contact pin locations can be read directly on the digital indicator. Centering sleeves are provided for measuring beadless air lines and 2-port standards. Flush setting of sliding loads is easily accomplished using the A048A gages.

Maury models A048A1 (female) and A048A2 (male) connector gages are compatible with Mitutoyo SPC Digimatic output for external display of data. All machined parts are made from heat treated stainless steel to assure long life and superior stability. Gaging surfaces are lapped to ensure a high degree of accuracy.

For more complete information on Maury's new metrology grade 1.85/2.4mm digital connector gage kit, please request Maury data sheet 2Y-048, or click the link below to download a pdf. copy.

2Y-048 (252 KB).

INQUIRES SHOULD BE DIRECTED TO:
Eric Kueckelsr, Device Characterization Sales Manager
email:

------------------------------------------------------------------------

About Maury Microwave

Founded in 1957, the privately held Maury Microwave Corporation is recognized as a world leader in the design and manufacture of innovative microwave test and calibration equipment, automated tuning systems, and precision test and measurement components. More information is available at www.maurymw.com.

Contact For This Article:

Eric Kueckels, Device Characterization Sales Manager
Maury Microwave Corporation
Tel: (518) 857-6224
email: