Home < Products < Precision Calibration Standards & Accessories < Connector Gage Kits
Connector Gage Kits
Features Direct Reading Self-Checking Accurate Easy to use Digital and Dial Indicator Styles Description Maury's connector gage kits provide an easy to use, direct reading, self-checking, and accurate way to measure the critical linear interface dimensions of most coaxial connectors. These kits consist of gages with specially adapted dial indicators, plus the correct bushings and pins needed to mate with specified connectors. A master setting gage is used to adjust the dial indicator to zero, before a push-on or thread-on gage is mated with a connector to measure the distance from a given interface (female or male contact location) to the outer conductor mating plane. Although Maury gages are normally sold as kits, individual components, replacement parts, and calibration services are also available. The table below lists the available kit models. Additional information on specific gage kits or individual components can be supplied on request. If this list doesn't include the right kit for your application, please contact our Sales Department or your local Maury representative for assistance. For more information about Maury precision connectors CLICK HERE.	[Click This Image For A Larger View] The A048A Digital Connector Gage Kit includes standards for gaging 1.85mm and 2.4mm connectors.
Available Models (Digital and Dial Indicator Styles) Connector Type Dial Resolution (inches) Model Digital Indicator Dial Indicator Description Data Sheet N 0.001 A007A No Yes Push-on gage measures female and male contact pin location. 2Y-002 N 0.00025 A020A No Yes Push-on gage measures female and male contact pin location. 2Y-003 N 0.0001 A020D No Yes Two metrology grade "thread-on" female and male gages measure contact pin locations. 2Y-003A N (75 ohm) 0.0001 A020G No Yes Push-on gage measures female and male contact pin location of (75 ohm) type N connectors. 2Y-003G N, TNC/BNC, SC/C 0.00025 A025A No Yes Push-on gage measures female and male contact pin location. 2Y-016 SMA 0.0005 A027 No Yes Two push-on gages measure female and male contact pin location. 2Y-004 SMA 0.0005 A027A No Yes Four push-on gages measure female and male contact pin and dielectric interface locations. 2Y-004 SMA 0.0005 A027G No Yes Two push-on gages measure female contact pin and dielectric interface locations. 2Y-004 SMA 0.0005 A027M No Yes Three push-on gages measure standard male contact pin and dielectric interface locations and the stepless 0.085-inch male pin dimension. 2Y-004 BNC, TNC 0.0005 A012A No Yes Two push-on gages measure female and male contact pin and dielectric interface locations. 2Y-009 AFTNC, TNC 0.00010 A012E No Yes Six push-on "universal" gages measure all contact pin and dielectric interface locations of all MIL-STD, IEC and commercial TNC connectors. 2Y-028 3.5mm, 2.92mm (K) 0.001 (mm) 0.00004 (in.) A050A Yes No Two metrology grade "thread-on" digital gages measure female and male contact pin locations of precision 3.5mm & 2.92mm (K) connectors. 2Y-049 3.5mm, 2.92mm (K) 0.00025 A034B No Yes Two push-on gages measure female and male contact pin interface locations. 2Y-020 3.5mm, 2.92mm (K) 0.00010 A034E No Yes Two metrology grade "thread-on" female and male gages measure contact pin interface locations. 2Y-020A 2.4mm/1.85mm 0.001 (mm) 0.00004 (in.) A048A Yes No Two metrology grade "thread-on" digital gages measure female and male contact pin locations of precision 2.4mm & 1.85mm connectors. 2Y-048 2.4mm 0.0001 A035E No Yes Two metrology grade "thread-on" gages measure female and male contact pin locations of precision connectors. 2Y-022A 7mm 0.0001 A028 No Yes Push-on gage measures planar contact location. 2Y-005 7mm 0.0001 A028D No Yes Metrology grade "thread-on" gage measures planar contact location. 2Y-005A OSP™ 0.00025 A039C No Yes Push-on measures contact pin location of female and male. 2Y-026 7-16 0.00025 A041A No Yes Push-on measures contact pin location of female and male. 2Y-027 SMP/GPO™1 0.00002 A042A No Yes Three push-on measures contact pin and dielectric interface locations of SMP connectors. 2Y-031 Multiport 0.00002 A045A No Yes Six push-on gages measures contact pin and dielectric locations of multiport connectors. 2Y-029 ZMA/BZ 0.00002 A046A No Yes Six push-on gages measures contact pin and dielectric locations of multiport connectors. 2Y-030 1 GPO™ is a trademark of the Gilbert Engineering Co., Inc.  Copyright 2007 by Maury Microwave Corporation. All rights reserved.