|
Home < About Us < Maury Microwave Corporation Declaration of Status to RoHS Directive |
|||
|
Maury Microwave Corporation Declaration of Status to RoHS Directive We strive to conduct all our business with honesty and integrity. We endeavor to provide products and services that meet or exceed, if possible, all legal regulations and/or requirements in their intended markets. As of July 2006 the European Union market will have begun enforcement of the Restriction of the use of certain Hazardous Substances (RoHS) Directive. RoHS is supplemental to the Waste of Electrical and Electric Equipment (WEEE) Directive; specifically categories 1, 2, 3, 4, 5, 6, 7 and 10. Maury products are intended for commercial, defense and industrial use only, and are classified within the WEEE/RoHS Category 9 list as monitoring and control equipment, which are currently exempt from RoHS compliance. MAURY PRODUCT LINES The Maury Device Characterization and Noise Calibration System product lines, used as Test and Measurement fixtures, are classified as monitoring and control equipment (category 9) and are currently excluded from the scope of the RoHS Directive. However, Maury is proud to state that most of these products are now RoHS compliant. Additionally, we are in the process of ensuring that all of these product lines will soon be in full RoHS compliance. Maury calibration standards, components and test accessory product lines are currently under review for RoHS compliance for all restricted substances. Most are manufactured from metal alloys, for which some are known to contain lead in small concentrations below the maximum levels specified by RoHS. To the best of our knowledge all above products have been found to be RoHS compliant. Maury considers it our corporate social responsibility to limit the use of hazardous substances and shall diligently continue to proceed with the development of products that would meet the requirements of the RoHS Directive.
|
|||
|
Copyright 2008 by Maury Microwave Corporation. All rights reserved.
|