Adapters

Description
Maury Microwave offers metrology-grade coaxial and waveguide adapters between DC-110 GHz available in most common commercial and military connector types.
VNA Calibration Kits, Microwave Components & Adapters Catalog


view online edition (recommended) +
view iPad edition +
view iPhone edition +
download PDF +
Available Adapters
| Model | Adapts From | Adapts To | Configuration | |
|---|---|---|---|---|
![]() |
8787S
|
OSP™ Male1 |
3.5mm
Female
2
|
Standard |

2 Precision 3.5mm per Maury data sheet 5E-062
OSP™ Connector Description
The Maury LPC/OSP connectors are designed to provide a precisely repeatable mated interface for calibration purposes and for test of production components which use the standard OSP series blind-mate connectors. Interface dimensions of the LPC/OSP connectors are tightly controlled, and a threaded coupling mechanism, utilizing a retractable, hexagonal coupling nut on the male connector, permit the use of a calibrated torque wrench (8 inch-lb) to further improve the repeatability of the electrical performance of the mated pair. Both the female and male LPC/OSP connectors are fully mating compatible with the standard OSP series and Dynawave/Dynamate series blind-mate connectors.
3.5mm Connector Description:
The Maury precision 3.5mm connectors on these adapters are miniature, instrument grade, air-interface connectors that are rated for operation from DC to 34 GHz. They comply with IEEE standard 287 for instrument grade general precision connectors (GPC3.5). NOTE: 3.5mm connectors, 2.92mm connectors, and SMA connectors are mateable
Specifications
| Frequency Range: | DC - 18.0GHz
|
| Maximum VSWR: DC - 4.0GHz 4.0 - 18.0GHz |
1.04 1.08 |
| Nominal Impedance: | 50 ohms |
| Insertion Length: | 1.50 in (3.81cm ) |




Copyright © 2013 - Maury Microwave Corporation. All rights reserved.
ISO: 9001:2008