Maury Microwave offers metrology-grade coaxial and waveguide adapters between DC-110 GHz available in most common commercial and military connector types.
|Model||Adapts From||Adapts To||Configuration|
Type N Female 2
2 Precision Type N per Maury data sheet 5E-049
7-16 Connector Description
The Maury 7-16 interface is designed to provide a standard test interface that is tighter controlled than the grade "0" standard test connectors specified by European Standard EN 122190 and British Standard BSEN 122190. This interface also complies with the requirements of the "Reference Connector" specified in IEC standard publication 169-4 and is designed to be used as a test connector for all devices which use the general purpose 7-16 connector described in all three standards mentioned above.. Recommended torque value when mating these connectors to themselves or to general purpose 7-16 connectors is 20.0 in. lbs.
Type N Connector Description:
The precision Type N connectors on these adapters are miniature, instrument grade, air-interface connectors that are rated for operation from DC to 18 GHz. They comply with IEEE standard 287 for instrument grade general precision connectors (GPC Type N). The connectors are normally made with stainless steel bodies with heat treated gold plated beryllium copper contacts
DC - 8.0GHz
DC - 7.5GHz
2.86 in (7.26cm )